Do you want to make and sell items from this pattern? Commercial licenses are available!

Here’s one more vacation/travel themed page! This page was about 3 weeks in the making due to two weeks of me being quite sick. It was all I could do to make it through each day taking care of Jax and doing as much work for my day job as possible. I still came out 12 hours short in work hours, ugh. Not that I’m well, I knocked the rest of the page out and I’m ready to move on!

What I used: the pattern, felt (in light blue, dark gray, white, natural, brick red, aqua, yellow, blue, red, gray and scraps), thin blue ribbon, thin gray or tan ribbon, decorative ribbon, snaps or Velcro and matching thread.

Background: Sew the windows on to the front of the airport. Cut out the door and a small slit for a ribbon to come through on the left side. Thread a length of ribbon through the slit, coming out of the door for the truck. Pin down your ground and airport pieces. You will need to layer a scrap block of felt behind the door of the airport. Sew down the airport building, leaving the door open. Sew the air traffic control window and roof on and add decorative ribbon if you’d like. (You could add photos of loved ones to the tower and windows of the airport and sew clear vinyl over top.) Pin and sew clouds to the sky. I caught one end of my blue “small plane” ribbon under the cloud in the upper right corner and the other end under edge of the ground. Sew down the ground.

Baggage Truck: Pin the truck bed and cab pieces onto the end of the ribbon. Sew the sides and bottom of the bed (making a pocket for luggage) and all the way around the cab. Add the wind shield and wheels. Sew a folded scrap rectangle of felt to the left end of the ribbon to keep it from going through the slit.

Small Airplane: Make 4 French knot windows on the top small plane piece. Sew the wind shield pieces on each side. Sew the two plane pieces together. Decorate the plane’s tail by sewing some decorative ribbon around it. Take a scrap square of white felt and sew the top and bottom of it to the back of the plane with the blue ribbon running through it. Your stitches will make the accent lines across the base of the wings. Your small plane should then “fly” up and down the ribbon.

Large Airplane: (Because the airplane was wider than my 9″ pages, I had the airplane’s tail sticking off the page so it can fold over when the page closes. My instructions assume you do the same.) Pin the base airplane piece down to the page, leaving the tail unpinned. Cut the top airplane piece into 3 segments. Sew stars to the two tail side, then sew the tail together. Add the tail fins. Sew windows and wind shield to the front two airplane segments. Pin down and sew the engines, wing and front airplane segment. Sew the bottom half of the gray cargo hold piece to the page in the middle segment of the airplane. Fold down the rest of the cargo hold piece and sew the middle segment of the top airplane to it to make a flap that lifts to show the baggage. Sew a snap on to hold the flap closed, and add snaps to secure any bags you make.

Helicopter: Sew the two blade pieces together. Fold the “x” in half where indicated on the pattern and make a few stitches int he center to hold it down. Sew thin ribbon down to both sides of the landing gear background pieces as indicated on the pattern. Sew the two sides together. On the front piece of the helicopter, sew down the wind shield, accent piece and inner door piece. Sew down the door along one side so it opens. On the back piece of the helicopter, sew down the wind shield, accent piece and a snap. Sew the front and back together with the blades and landing gear in place. Sew the other half of the snap to the page above the roof.

Luggage: I didn’t use patterns for my luggage because they are so tiny! I did draw up what I made afterwards, so you can use those as a guide if you’d like. They just need to fit in the cargo hold (and truck bed) and have snaps to attach them.

Jax hasn’t really played with this yet because it is for our beach trip, but he loves the little helicopter and the small plane that takes off. I think he’s going to enjoy it!

I’ve been quiet here, but busy busy busy! This week has been work, time with Jax and sewing the latest addition to Jax’s vacation quiet book: an ice cream parlor! (If you are a fan of the Facebook page, you can see little sneak previews as I sew up new pages.)

This page is a mostly for-fun one, but does involve some matching (putting the ice cream away) and coordination (stacking the scoops on the cones.) Jax likes to count the scoops as he stacks. Our trips to the beach always involve walking to the ice cream parlor, so I knew I had to make this page! Please note that the pieces on this page are small. Scale them larger for a younger child and always supervise their play!

For this page I used: the pattern, 2 9″ x 12″ sky blue background felt sheets, felt (in purple, orange, lime green, pink, hot pink, gray, white, tan, brown, cream, lime green dots and yellow tie dye), ice cream ribbon, clear vinyl scraps, seed beads, sequins and embroidery floss. I got the patterned felt and spool of ribbon from my local craft store. I chose my felt colors based on the ribbon.

Can’t find ice cream ribbon? I’m giving away my extra here!

Background Elements: Sew down the table, ice cream case and and counter. The case is a simple gray rectangle, and the counter is a strip of pink. Pin your awning scallops under strips of matching felt (mine are purple) and sew a strip of ribbon across.

Bowls & Jars: For the purple ice cream bowl and the toppings tray, sew through both layers of felt along the sides and bottom. Along the top, sew only through the bottom layer, making a pocket. For the sprinkles jar, take a small rectangle of clear vinyl and felt in your background color. Sew up three sides, fill it with seed beads, and sew the top closed. I did this on the sewing machine to insure they couldn’t leak out. Sew the pouch down to the page. Sew a strip of gray felt across the top and a small circle as the jar lid handle. Repeat for the sequin “cherry” jar. You could also use bugle beads to make a jar of “jimmies”, but I didn’t have any in my stash.

Ice Cream Containers: Sew the labels to the bucket shapes so that you have one to match each flavor. I decorated two of mine first: dark brown stitched “fudge” swirls and little felt “chocolate chips”. Sew the buckets to the ice cream case along three sides, leaving the tops open. I staggered mine a bit to give them a little more room.

Ice Cream Scoops: Decorate both sides of the scoop if needed (I did the fudge swirls and chocolate chips mentioned above) then sew the two sides together. I decided not to use Velcro, snaps or magnets, but you could. I find that Velcro snags the background felt and wears the quiet book out faster. I wanted my ice cream page to be about free-play, so Jax can decide where they go.

Ice Cream Cones: I’d originally planned to have the cones be loose pieces, but the ice cream wasn’t staying on. I changed my plans and sewed three of them down to the table. This made it easier because I didn’t have to embroider both sides of each cone! I used 4 strands of tan embroidery floss and stitched a curving line to show where the inside of the cone was. Then I made long stitches in one direction down the length of the cone. Switching to perpendicular stitches, I wove the thread over and under to make a basket weave effect.

Toppings: I used the syrup pattern only as a guide for the basic shape and size, but cut the drips out different for each topping. Cut two sides for each one. I made three, but could have gone on forever! For my hot fudge sauce, I cut out two of the whipped cream pieces and decorated them with seed bead sprinkles. I sewed the two sides of the fudge together, then sandwiched that between the two whipped cream pieces, sewing them together as well. For the berry topping, I stitched the syrup together in hot pink. I free-hand cut out two oval shapes for the strawberry and one spiky green piece for the leaves. I pinned the strawberry around the top of the syrup with the green bit sticking out of the top and sewed it together. The caramel syrup with a cherry was done the same way, minus the green. I then sewed a sequin on to each side of the cherry to make it match the cherries in the jar.

I didn’t have to tell Jax what this page was (“Ice creams!”) despite him never having had an ice cream cone (we get bowls of frozen yogurt usually.) I did show him how to stack them on the cones and put them in the bowl and buckets and he took it from there. This is a fun page for both of us!

I’d love to see this made in different colors than we chose. Please share a photo if you decide to make this page! Stay tuned for a post with a chance to win lengths of my extra ice cream ribbon!

The Itsy Bitsy Spider
Climbed up the water spout.
Down came the rain
And washed the spider out!
Out came the sun
And dried up all the rain.
So, the Itsy Bitsy Spider
climbed up the spout again!

An animated gif would gave been too big for this page, so you’ll have to suffer through my singing! It was a bit tricky holding the camera in my right hand and opening the flaps/moving the spider with my left hand, but I managed!

This page was a request on the Facebook page (come join in the fun!), and one I though about a lot before creating. While it would have been more accurate to have the spider crawl up inside the spout, it would have obscured the view of him and made it hard to show the rain “washing him out”.

I decided what was important to me was being able to show the various stage of the rhyme, showing the weather (and the before/after that happens when the weather changes) and letting Jax control the spider.

For this page I used: The pattern, background felt in a 9″ x 9″ sky blue square, green felt cut into fringe for grass, felt (in dark red, red, orange, yellow, yellow-orange, gold, green, sky blue, aqua, black and cream), light blue ric rac, tiny white ric rac (I didn’t have black), thin blue ribbon, thin gray ribbon, green looped ribbon, a button, sequins and embroidery floss.

To start, I pinned down the side of the house and the grass, then pinned and sewed the gutter on top of it. I pinned a piece of green ribbon in place for the flower stem then sewed the grass in place with 4 stitches at the bottom of each stem.

Sew the face onto the sun circle. I did a dashed line of stitches for a smile, three little stitches close together for a nose and sequin cheeks. For the eyes: I made a stitch, but before puling it tight, I made a tiny stitch across the center of it that held it in an arch shape. Pin the sun to the page on top of the rays and sew it down. I left the rays loose.

To decorate the “rainy” stage of the water spout, I sewed down some ric rac and felt raindrops. This goes on the water spout sewn to the page. To make the flap that covers it, sew the second (partial) water spout onto one of the house flap pieces, then sew them together, Sew it down to the page along the left side.

Next I made the rain scene. I sewed faces on the rain clouds the same as for the sun, but with French knots holding the sequins on. I sewed raindrops back-to-back onto the ends of ribbon scraps to make the rain. Pinning the clouds and rain to one side of the sky flap, I sewed everything down. Make sure the rain is not so long that it sticks out when the flap is folded down (the rain clouds will be upside-down when it is closed.)

I sewed two identical ladybugs. They have dashed smiles, French knot cheeks and eyes and black French knots holding the wings on the body. Lay everything for the ladybug rain scene out and sew it down: a dashed line down the middle of the leaf, a few stitches for each petal, a bunch of French knots at the flower’s center, a scrap of ribbon for the umbrella stem and stitches around the top and on the spines of the umbrella (leave the bottom open and stretch the felt a bit for a curved look). I added a button at the top of the umbrella – just because buttons are cute!

Figure out where on the page your sky flap needs to be so it covers the sun completely, then sew down a bit of the flower stem ribbon onto the other piece of the sky flap so that it lines up with the one on the page. Sew the flower and leaf the same as before. I place my ladybug in a slightly different spot, just because.

Sew the two sides of the sky flap together (the rainy side upside-down) and sew it to the page along the top.

For the spider I sewed eyes and a mouth on the front piece then layered ric rac and the end of a ribbon between the two sides of the spider’s body. I cut 4 pieces of ric rac and had them cross in the middle so they stuck out both sides. Sew around the spider’s body.

When sewing your page down to the backing, make sure to catch the other end of the spider’s “web” ribbon at the top so he is attached to the page. Stop and start at all the flap folds so you don’t accidentally sew the flaps closed. I used some cute paisley patterned felt as the back side of my page.

Jax can’t sing Itsy Bitsy Spider just yet (he does a great Twinkle Twinkle!) but he is starting to sing along to some of the words now that we have this page to play with. He especially loves the umbrella, which he calls a “boo-ya”!

What do you think?

I will be making a number of beach and summer themed quiet book pages between now and May when we take a road trip to the beach. My next page will be Isty Bitsy Spider, but I’m trying to decide what to do after that: ice cream parlor or bonfire and s’mores. What do you think?

This is a two page spread that features both matching and my spin on the classic purse quiet book page. I wanted to make one, but I also wanted to make it gender neutral. When you open the bag, you’ll find sunglasses, an iPhone and a little snack of watermelon (Jax’s favorite!). The bag also holds all the flip flops from the matching page.

I had leftover flip flop buttons from the ocean i-spy page, so I decided to use them as the inspiration for the matching game. The flip flops are magnetic so they can stick easily to the footprints in the sand. If you don’t have the buttons, or wanted to do something different, you could make the footprints colored, or outline them with a color. You could even make two of each shoe and have them waiting in the sand for the other half of their pairs. I got my buttons from A.C Moore. They were $1.99 in the store.

So for this page, I used: The pattern, natural felt for the background (I used 9″ x 12″, but you could use two 9″ x 9″ squares and mount them on white felt), felt (in pink multi-dot, hot pink, red, orange, yellow, light green, green, aqua, purple, light gray, dark gray, white and tan – lots of scraps!), stiff glitter felt in lime green, tinted vinyl (mine was blue, from my scrap stash), clear vinyl, batting or stuffing, flip flop buttons and ribbons.

Sand Footprints: Sew the footprints down to the page with a magnet under each one. Sew around the magnet to hold it in place. Sew each button beside a footprint.

Flip Flops: I included all the pattern pieces I used to make flip flops that match the buttons. Decorate the top of your flip flop first. Sew a vertical line of stitches to attach center of the strap. Sew a magnet to the inside of the sole of the shoe, using a scrap of felt to hold it in place. Sew the top and bottom together around the edges, catching both sides of the straps in your stitches.

Beach Bag: Sew Velcro or snaps to the top of the bag lining pieces, making sure they line up. Pin a length of ribbon of strip of felt like a handle between the outer piece of the bag and one of the lining pieces. Sew across the top. Pin the other bag lining piece to the page and sew across the top. Pin the handle side of the bag on top of the side on the page and sew around the sides and bottom.

Glasses: Very simple! Layer your tinted vinyl between the two front frame pieces and sew them together. Sew each pair of frame arms together, them sew them to the front at the temples.

Watermelon: Sew the seeds to each red piece, then pin the red to the green. Sew a length of white ribbon over the edge of the red where it meets the green to make the rind (you could also cut some white felt and layer it between the red and green). Sew the front and back together, adding batting or stuffing if you want some dimension.

For the iPhone, please read the instructions from the iPhone and pocket watch page.

This page makes me even more ready to head to the beach! Hurry up, May!!

Are you ready to cook breakfast?

 I’m so happy to be back to sewing after my little break! And I think this page came out adorable…

Jax loves pretend play cooking and playing with his kitchen, so it made sense to do a breakfast page after someone asked for a frying pan on the Facebook page. (Sorry it took so long!)

This pattern uses some duplicate items from the Starbucks Breakfast page. The patterns are included here, but please see that post for instructions on the banana, egg and bacon.

For this page, I used: background felt in red and red polka dot, felt (in pink, red, burgundy, orange, yellow, cream, white, tan, brown, gray, dark gray, black and glitter black), clear vinyl, batting/stuffing, 1 grommet/eyelet, 5 snaps and a button.

To create the stove page, I started with a 9″ x 9″ red felt square. I covered a little less than the bottom half with a tan felt to make the counter. Because I wanted a way to store the food without using lots of Velcro that damages the felt, I sewed a clear vinyl pocket over the counter.

To make the knob, I sewed the two halves together, then installed a large eyelet in the center. I put it in place on the page and sewed a button to the page through the eyelet. This lets the knob spin around. I placed pins at all the points I wanted to add stitching, and I used them to keep my lettering straight. I free form stitched it all, but you could write it out first with a pattern pen. I did: LOW | | MED | | HIGH OFF.

The burner was simple – it just took a lot of stitching! The red spiral gets sewn to the black glitter circle (you could use plain black). Then the black circle gets sewn to the dark gray circle. The whole thing gets sewn down to the page.

To make the frying pan, I first stitched the inner circle from the pattern onto the top piece using the sewing machine (to save time.) I then layered some batting between the two sides and sewed them together around the outside. I’d considered adding a light cardboard or plastic canvas layer for stability, but I decided I wanted it to squish into my huge quiet book and not be bulky. When it was all sewn together, I sewed a second circle just inside the first to make the pan dip in a bit at the center.

To make the table page, I started with a 9″ x 9″ square of polka dot felt. I sewed the plate down using my sewing machine (I used off-white for my plate and cup) then sewed a second circle inside the first.

To make the napkin, I used a square of yellow felt. Use whatever you have on hand that coordinates! I went with yellow thanks to a Facebook suggestion. I folded the square then hand stitched a running stitch just beside the fold to keep it folded. The fork, knife and spoon are all made by sewing the two sides together. The fork also has three rows of stitching to make the tines.

The cup was made by sewing the orange juice down to the top of the back of the cup, just below the top so you see a little lip. You could make your orange juice go the full length of the cup (or even come out!). I hadn’t originally intended to leave the cup open like a pocket, but that is what I did. I sewed the front to the back around the lower three sides, catching the handle in the stitching.

The napkin, fork, knife, spoon and cup all have snaps sewn to them and the table to hold them in place.

The pancakes are made by simply sewing the two sides together. I made two. For the syrup, I sewed butter squares to the top pieces and then sewed the tops to the bottoms. For instructions for sewing the banana, bacon and eggs, see the Starbucks Breakfast page.

What do you think? Jax loves this page! He hasn’t figured out how to turn the knob yet, but he likes stacking everything onto the frying pan then putting it all away in the counter pocket. He calls the juice “tea” – maybe I should have made it brown! He sees mama drinking tea a lot.

If you sew this page, feel free to share your photos here or on the Facebook page!